ASKAR SQA55 · ELECTRONIC FOCUSER ADAPTATION
Add motorised focus to your SQA55
The Askar SQA55 AF Kit provides the bracket and belt-drive hardware for fitting a compatible electronic focuser to the SQA55 astrograph. It connects your focuser motor to the telescope's focusing ring, creating the mechanical link needed for motorised focus adjustments.
This is the mechanical fitting kit. The telescope, electronic focuser motor, controller and imaging equipment shown in the photographs are not included.

Why use the dedicated AF kit?
A mounting arrangement suited to the SQA55
The dedicated adapter plate is designed around the SQA55's layout, helping position the motor while leaving useful space around the rear of the telescope. Check the complete rig's clearances, including camera, cables and any other accessories.
Adjust the belt tension
The tensioner lets you take up belt slack rather than relying on a fixed belt position. Correct alignment and tension help limit lost motion in the drive. Follow Askar's fitting instructions and check that the motor turns the focus ring smoothly before running an autofocus routine.
Adapt the plate position
The L-shaped adapter arrangement can be repositioned to suit different motor mounting patterns. Askar describes reversing the plate and adjusting its spacing for focusers with wider fixing-hole separation. The assembly can also be repositioned on the SQA55 to accommodate the rest of your equipment.

Check your electronic focuser before ordering
The kit is intended to accommodate a range of electronic focusers, but fitting depends on the motor shaft diameter, pulley, fixing-hole spacing, belt length and available clearance. It is not a guarantee that every focuser or every hardware revision will fit.
Using an EAF Pro or ToupTek focuser?
Askar has revised the kit with additional belt and pulley parts for newer focusers. Please ask us to confirm the required parts for your exact focuser model before ordering for an EAF Pro or ToupTek installation.
| Product | Askar SQA55 AF Kit |
|---|---|
| Purpose | Mechanical mounting and belt-drive adaptation for an electronic focuser |
| Telescope fit | Askar SQA55 |
| Drive system | MXL timing belt and synchronous pulley |
| Adjustment | Belt tensioner and adjustable L-shaped adapter arrangement |
| Motor compatibility checks | Shaft, pulley, fixing pattern, belt length and clearance |
| Electronic focuser motor | Required separately |
| SKU | asksqa55 |
What's included
- SQA55 adapter bracket and L-shaped mounting hardware
- MXL timing belts and drive-pulley hardware
- Belt tensioner
- Mounting screws and hex keys
Sold separately: Askar SQA55 telescope, electronic focuser, power/control connections and imaging equipment.
Fitting and first setup
- Check the parts and clearances. Match the pulley and fixings to your focuser and choose an appropriate mounting position.
- Fit the bracket and motor. Follow Askar's instructions for securing the assembly to the SQA55.
- Align the drive. Fit the appropriate belt, align it with the focus ring and adjust the tensioner.
- Test gently. Check travel and cable clearance, then configure the focuser and autofocus settings in your chosen control software.
Watch Askar's official SQA55 AF Kit installation video for the fitting sequence.

Practical questions
Does this kit autofocus by itself?
No. It supplies the mechanical connection. A compatible electronic focuser motor and suitable control system perform the focus movements and autofocus routine.
Will it work with my imaging controller?
Controller and software support depend on the electronic focuser you choose. This bracket kit does not add drivers or change which motors your controller supports.
Can I use it on another Askar telescope?
This kit is designed for the SQA55. Check the correct model-specific fitting kit for another telescope rather than assuming the bracket or belt will match.