Choose the detail you want to follow
The original DayStar Solar Scout 60 pairs a 60 mm doublet with a matched Quark H-alpha filter module. Choose the Chromosphere edition to study structure across the disc or the Prominence edition to follow material above the solar limb.

Choosing your H-alpha edition
Chromosphere
Choose this edition for structure across the disc. Its narrower passband brings out dark filaments and bright patches called plage around active regions. Prominences can also be visible at the limb.
Prominence
Choose this edition if arches, loops and changing shapes above the solar limb are your main interest. The broader passband favours a brighter prominence view.
The original Scout 60

DayStar places this original model in its discontinued-manuals section. Please check with Dark Clear Skies for availability of the edition you want.
What to look for on the Sun
These photographs show features to recognise. Each caption identifies the equipment or photographer behind the reference image.


Finding the Sun, focus and power

The Vixen-style foot fits a compatible saddle and also has a ¼″–20 photo-tripod fitting. Secure the telescope on a suitable mount, use the projection finder’s rear screen for alignment, then turn the front ring to focus.
The filter uses a temperature-controlled etalon. Use the supplied power arrangement and wait for the ready indication before observing. For an alternative USB supply DayStar specifies 5 V with at least 2 A available.
Solar observing safety
Read the Scout 60 operating manual before pointing the telescope at the Sun. Check that the complete filter assembly is secure and undamaged. Never look along the tube towards the Sun or use the telescope with any part of its solar filtration removed. Stop if a component is loose or damaged.
Will the whole disc fit on your camera?
A Sun 32 arcminutes wide forms an image about 8.7 mm across at 930 mm. Compare that diameter with the shorter side of your sensor. Leave space around the limb for prominences and tracking drift.

Technical specifications
| Objective | 60 mm achromatic doublet |
|---|---|
| Effective focal length | 930 mm |
| Effective focal ratio | f/15.5 |
| Observing wavelength | Hydrogen-alpha, 656.28 nm |
| Filter assembly | Matched DayStar Quark, choice of Chromosphere or Prominence |
| Wavelength tuning | Temperature controlled, adjustable up to ±0.5 Å from centre |
| Focus | Front helical focusing, non-rotating eyepiece |
| Eyepiece fitting | 1.25″ holder |
| Mounting | Vixen-style foot with ¼″–20 tripod fitting |
| Power | 5 V USB, supplied power arrangement recommended |
What comes with the telescope?
Supplied by DayStar
- 60 mm Solar Scout optical tube with the selected H-alpha filter
- Solar Bullet projection finder and Vixen-style mounting foot
- Hard transport case and power supply
To complete your setup
- Suitable stable mount or tripod
- 1.25″ diagonal and low-power eyepiece for visual use
- Compatible camera fitting for imaging, if required
Practical questions
Which eyepiece gives a useful starting magnification?
A 32 mm Plössl gives approximately 29× and a 25 mm gives about 37×. Start with the lower power when the air is unsteady.
What does the tuning control change?
It shifts the central wavelength sampled by the filter. Give the etalon time to settle after an adjustment. Use the separate helical ring to sharpen the image.
What distinguishes the original Scout 60 from the Scout 60 DS?
The original telescope has a matched Quark module and came in two filter editions. The DS telescope has one permanently integrated narrow-passband H-alpha system. Follow the manual for the exact model you own.