Follow a prominence at a larger image scale
The DayStar Solar Scout 80 combines an 80 mm aluminium-tube refractor with a dedicated hydrogen-alpha filter. Its 1,400 mm effective focal length gives the solar limb more space on the sensor, useful for framing a prominence or a single active region.

Choosing your H-alpha edition
Chromosphere
Choose this edition for structure across the disc. Its narrower passband brings out dark filaments and bright patches called plage around active regions. Prominences can also be visible at the limb.
Prominence
Choose this edition if arches, loops and changing shapes above the solar limb are your main interest. The broader passband favours a brighter prominence view.
What to look for on the Sun
These photographs show features to recognise. Each caption identifies the equipment or photographer behind the reference image.


Finding the Sun, focus and power

The Vixen-style foot fits a compatible saddle and also has a ¼″–20 photo-tripod fitting. Secure the telescope on a suitable mount, use the projection finder’s rear screen for alignment, then turn the front ring to focus.
The filter uses a temperature-controlled etalon. Use the supplied power arrangement and wait for the ready indication before observing. For an alternative USB supply DayStar specifies 5 V with at least 2 A available.
Solar observing safety
Read the Scout 80 operating manual before pointing the telescope at the Sun. Check that the complete filter assembly is secure and undamaged. Never look along the tube towards the Sun or use the telescope with any part of its solar filtration removed. Stop if a component is loose or damaged.
Will the whole disc fit on your camera?
A Sun 32 arcminutes wide forms an image about 13.0 mm across at 1,400 mm. Compare that diameter with the shorter side of your sensor. Leave space around the limb for prominences and tracking drift.

Technical specifications
| Objective | 80 mm achromatic doublet |
|---|---|
| Optical tube | Aluminium |
| Effective focal length | 1,400 mm |
| Effective focal ratio | f/17.5 |
| Observing wavelength | Hydrogen-alpha, 656.28 nm |
| Filter assembly | Matched DayStar Quark, choice of Chromosphere or Prominence |
| Wavelength tuning | Temperature controlled, adjustable up to ±0.5 Å from centre |
| Focus | Front helical focusing, non-rotating eyepiece |
| Eyepiece fitting | 1.25″ holder |
| Mounting | Vixen-style foot with ¼″–20 tripod fitting |
| Power | 5 V USB, supplied power arrangement recommended |
What comes with the telescope?
Supplied by DayStar
- 80 mm Solar Scout optical tube with the selected H-alpha filter
- Solar Bullet projection finder and Vixen-style mounting foot
- Hard transport case and power supply
To complete your setup
- Suitable stable mount or tripod
- 1.25″ diagonal and low-power eyepiece for visual use
- Compatible camera fitting for imaging, if required
Practical questions
Which eyepiece gives a useful starting magnification?
A 32 mm Plössl gives approximately 44× and a 25 mm gives about 56×. Start with the lower power when the air is unsteady.
What does the tuning control change?
It shifts the central wavelength sampled by the filter. Give the etalon time to settle after an adjustment. Use the separate helical ring to sharpen the image.
How does the Scout 80 frame a target beside the Scout 60?
At 1,400 mm, a feature is about 1.5 times larger on the same camera than at 930 mm. The 60 gives wider coverage on that sensor.