Use 1.25-inch accessories in your 2-inch holder
The Baader 2-inch to 1.25-inch ClickLock Reducer, 2956214, adapts a compatible 2-inch focuser or diagonal to securely hold 1.25-inch eyepieces and accessories.
The low inserted height makes it useful when you want the handling of ClickLock without adding a tall adapter above the existing holder.

A mechanical reducer, not a focal reducer
The word reducer here describes the change in accessory barrel size. There are no focal-reducing optics in this adapter: it does not shorten the telescope's focal length or change the magnification of an eyepiece.
Insert its 2-inch barrel into your existing holder, secure that connection, then fit a 1.25-inch accessory and operate the ClickLock ring. Support the accessory while opening the clamp.
Low-profile fit and additional threads
Baader specifies an inserted optical height of 9.5 mm when the barrel is seated in a 2-inch holder. The full optical length is different if the part is used in a threaded configuration rather than inserted by its barrel.
The telescope-side internal fittings include an M48 thread for suitable 2-inch filters and a T-2 / M42 × 0.75 connection for compatible threaded accessories. Check physical depth and clearance so a long eyepiece barrel cannot contact an installed filter.
Pairing it with a 2-inch diagonal
Baader's 2956100 ClickLock mirror diagonal has a 2-inch accessory clamp. This reducer lets you retain 1.25-inch eyepieces in that larger holder. The diagonal and eyepiece remain separate purchases.
Specifications
| Baader part number | 2956214 |
|---|---|
| Baader T-2 system part | 15B |
| Outer insertion barrel | 2-inch / 50.8 mm |
| Accessory clamp | 1.25-inch / 31.75 mm ClickLock |
| Inserted optical height | 9.5 mm in a 2-inch holder |
| Internal connections | M48 filter thread; T-2 / M42 × 0.75 |
| Compression ring | Hardened bronze |
| Stated net weight | 100 g |
What's included?
1 × Baader 2956214 ClickLock 2-inch-to-1.25-inch reducer. Eyepieces, filters, diagonal and the telescope-side 2-inch holder are not included.
Questions before you buy
Does it fit a 1.25-inch focuser?
Its insertion barrel is 2 inches. It is intended to accept smaller 1.25-inch accessories inside an existing 2-inch holder, not to enlarge a 1.25-inch focuser.
Does the 9.5 mm figure apply in every configuration?
It describes the inserted height in a 2-inch holder. A direct T-2 attachment has a different installed length; check the full arrangement before ordering.
Do I need to tighten the ring forcefully?
Use the intended light-pressure ClickLock action. Avoid forcing the mechanism and always check the accessory is seated securely.
Explore our Baader Planetarium range for compatible visual accessories and adapters.