A wider field from your EdgeHD 9.25″
At its native 2,350 mm focal length, the EdgeHD 9.25 can frame a galaxy tightly. Celestron’s dedicated 0.7× reducer brings it to 1,645 mm at f/7, giving you more sky around the target while retaining the telescope’s corrected field and 146 mm photographic back focus.

What changes in the image?
With the same camera, each edge of the frame covers about 43% more sky. That can make the difference between clipping the outer arms of a galaxy and keeping enough background around it. For an extended target, f/7 also needs roughly half the exposure of f/10 for comparable signal per pixel under similar conditions.
| On an example APS-C sensor | Native f/10 | With 0.7× reducer |
|---|---|---|
| Focal length | 2,350 mm | 1,645 mm |
| Approximate field | 34.4′ × 23.0′ | 49.1′ × 32.8′ |
Calculated for a 23.5 × 15.7 mm sensor. Your camera’s active sensor dimensions determine your field.
Optics and connections
Four fully multi-coated elements, including lanthanum glass, sit in a machined aluminium housing. The 60 mm clear aperture feeds a 42 mm optimised image circle. The wide rear-cell connection leaves room for imaging accessories, including a compatible off-axis guider.


Setting the camera spacing
Measure 146 mm from the rear end of the reducer’s threads to the camera sensor, as shown in Figure 1 of Celestron’s manual. Include the optical lengths of the T-adapter, any off-axis guider or filter wheel, and the camera’s own flange-to-sensor distance. The 55 mm often quoted for a camera and T-ring forms only part of that total.
Check your telescope first
Model 94245 fits the EdgeHD 9.25-inch (235 mm) rear 3.25-inch connection. The standard C9.25 Schmidt-Cassegrain and the 8-, 11- and 14-inch EdgeHD tubes require their own optical solutions. Check the EdgeHD marking on the tube before ordering.


Technical specifications
| Manufacturer part number | 94245 |
|---|---|
| UK distributor reference | 94245-CGL |
| Optical design | 4 elements, fully multi-coated, with lanthanum glass |
| Clear aperture / optimised image circle | 60 mm / 42 mm |
| Telescope fitting | 3.25-inch rear thread on the EdgeHD 9.25 |
| Optimal photographic back focus | 146 mm to the sensor, measured as shown in the manual |
| Focal ratio / effective focal length | f/7 / 1,645 mm on the EdgeHD 9.25 |
What’s included
Celestron 0.7× Reducer Lens for EdgeHD 9.25″ and threaded metal protective covers for both ends. The telescope, T-adapter, T-ring and camera shown in the installation photographs are separate.
Before you order
Can I keep my existing EdgeHD 9.25 camera adapter?
The design preserves the native 146 mm back focus. Celestron lists T-adapters #93646 and #93622 as options with a camera system providing 55 mm at its end. Check the complete spacing if you add or remove a guider or filter wheel.
Will it cover my full-frame sensor?
Celestron specifies a 42 mm optimised circle. A 36 × 24 mm sensor has a diagonal of about 43.3 mm, so its extreme corners fall just outside that circle. Accurate spacing and flat-field calibration matter most towards those corners.