A brighter, lower-power view through a Combo Quark
The CC28B is the lower-power of DayStar’s two screw-on telecentric Barlows for the classic Combo Quark. It suits wider framing and visual configurations such as a binoviewer, where the light is shared between two eyes.
- Power
- 2.8×
- Refractor range
- f/5 to f/14
- Full-disc guide
- About 720 mm or shorter

Choose the Barlow for your refractor
Remove the silver nosepiece from the classic Combo Quark and thread the Barlow directly onto the telescope side of the filter. The telecentric design provides the light beam the etalon needs. DayStar lists f/5 to f/14 refractors for the 2.8× unit.
For full-disc viewing, DayStar gives approximately 720 mm or shorter as a guide to the telescope’s native focal length. A 500 mm refractor works at 1,400 mm with this Barlow. For a camera, also check whether its sensor dimensions can accommodate the disc.
Fitting and detail

Compare the two Barlow powers

Technical specifications
| Model | CC28B |
|---|---|
| Optical design | Telecentric Barlow for the classic Combo Quark |
| Amplification | 2.8× |
| Manufacturer’s refractor guidance | f/5 to f/14 |
| Native focal length guide for a full disc | Approximately 720 mm or shorter |
| At 500 mm telescope focal length | 1,400 mm effective focal length |
| Attachment | Screws in place of the Combo Quark’s silver nosepiece |
What comes with it
Included
One DayStar 2.8× telecentric Barlow assembly.
Supplied separately
Classic Combo Quark H-alpha filter, suitable telescope, solar energy rejection specified for the system and your eyepiece or camera.
Solar observing. This accessory forms part of a solar observing or imaging system. Fit and inspect the complete solar filter and any required energy rejection in accordance with the telescope and filter manuals before pointing at the Sun.
Questions about fit and use
Is this Barlow intended for the original Quark?
DayStar designed this accessory for the classic Combo Quark. The original refractor Quark already incorporates its telecentric optics.
How do the two powers compare?
On the same telescope the 4.3× gives roughly 1.54 times the image diameter of the 2.8×. The 2.8× favours a wider, brighter view. The 4.3× favours image scale and surface contrast.