Choose the off-axis cell for your SCT
Place a reduced, unobstructed working aperture to one side of the secondary mirror on a compatible SCT solar setup. Match the off-axis glass and front cap to the telescope and the specific downstream solar filter.

In use
An off-axis opening keeps the secondary obstruction out of the working beam. The smaller working aperture also changes the effective focal ratio presented to the rear filter.
Check the fit
The nominal SCT size is a guide. Measure the outside of the front cell or dew shield and give DCS the exact make, model, front measurement and rear solar filter for a fit check. Check the required optical alignment or wedge with DayStar.

Specifications and fitting
| Glass position | Off-axis |
|---|---|
| Listed glass apertures | 63–125 mm |
| Telescope design | SCT |
Choose your sct family and cap
| SCT family and cap | DayStar part number |
|---|---|
| 8″ SCT family · 63 mm aperture · 244 mm cap | E-244F63 |
| 9.25″ SCT family · 80 mm aperture · 281 mm cap | E-281F80 |
| 10″ SCT family · 80 mm aperture · 311 mm cap | E-311F80 |
| 12″ SCT family · 100 mm aperture · 356 mm cap | E-356F100 |
| 14″ SCT family · 115 mm aperture · 410 mm cap | E-410F115 |
| 16″ SCT family · 125 mm aperture · 460 mm cap | E-460F125 |
What you receive
One off-axis front ERF and cell in the selected configuration. Rear etalon, matching optical fittings and telescope are separate.
Can I select purely by the telescope’s quoted aperture?
The cap must fit the physical front of the instrument. Two tubes with the same quoted aperture can need different fittings.