Reduce interference bands at the existing image scale
Newton’s rings appear as light and dark bands superimposed on a narrowband solar image. The IEQT lets you tilt a T2 camera by up to 5° in either direction, helping to suppress the pattern while keeping your Quark’s original focal length.
- Movement
- ±5° tilt
- Camera fitting
- T2 male
- Sensor spacing
- 17.5 or 12.5 mm

Set the spacing before adjusting the tilt
Check the distance from the camera’s front mounting face to its sensor. A 17.5 mm camera mounts directly. For a 12.5 mm camera, fit the supplied 5 mm ring between the tilt adapter and camera. This places the sensor near the centre of rotation to keep framing and focus steadier as the angle changes.
With the complete solar system correctly installed, use the live camera image to judge the pattern. Start with little tilt, adjust in small steps and retighten the screws. DayStar also provides mounting positions at 30° intervals so the camera body and cables can be oriented conveniently.
Tilt adjustment and interference bands



Technical specifications
| Model | IEQT, Quark-to-T version |
|---|---|
| Optical effect | No focal reduction |
| Tilt adjustment | Up to 5° in either direction |
| Filter side | Male 1⅜″–24 UNS Quark thread |
| Camera side | Male T2, M42 × 0.75 |
| Designed sensor distance | 17.5 mm, or 12.5 mm with the 5 mm ring |
What comes with it
Included
DayStar IEQT tilt adapter and 5 mm camera spacer.
Supplied separately
Compatible DayStar Quark, solar imaging setup and camera with a suitable female T2 connection.
Solar observing. This accessory forms part of a solar observing or imaging system. Fit and inspect the complete solar filter and any required energy rejection in accordance with the telescope and filter manuals before pointing at the Sun.
Questions about fit and use
Will it also fit a 55 mm T-ring and DSLR combination?
DayStar specifies a different T-mount Interference Eliminator, MG0408, for a 55 mm flange-to-sensor distance. Check the complete spacing of your camera and ring.
Can I use this to fit more of the Sun on the sensor?
The IEQT changes camera tilt only. For a compatible Combo Quark, DayStar also makes 0.60× and 0.33× tilt reducers.