A 100 mm aperture with a whole-disc visual field
The DayStar Sol 100 pairs a 100 mm aperture with a 0.75° visual field. Centre the Sun in a suitable low-power eyepiece and there is room to follow activity beyond its edge. For imaging, the 1,690 mm effective focal length gives close-ups of active regions without adding an external Barlow.

Choosing your filter edition
Chromosphere
Choose this for contrast across the face of the Sun. The narrow passband brings out dark filaments and bright plage around active regions. Prominences are also visible at the limb.
SOL100C · 0.5 Å FWHM or narrowerProminence
Choose this when your main interest is the changing shape of prominences against the dark sky. The wider passband favours limb features, with softer contrast across the disc.
SOL100P · wider than 0.5 Å FWHMEach edition has its own factory-selected filter. The tuning knob shifts the wavelength slightly either side of H-alpha to explore detail in moving material. Choose the edition when ordering.
What you can observe in H-alpha

Reading the H-alpha view
Start with the complete disc to locate the brightest plage, then examine the surrounding filaments. The 12:1 fine control is especially useful at this focal length, where a small adjustment can bring fine texture into focus.
Hydrogen-alpha isolates red light at 656.28 nm, revealing the chromosphere above the visible solar surface. These reference photographs show how observers record its features. Image processing and solar activity both affect their appearance.


Mounting, finding the Sun and focusing

Secure the Vixen-style dovetail in a suitable mount. The foot also has a ¼″–20 tripod thread. Allow for the weight of the complete setup. A tracking mount makes it easier to keep the same feature in view during a longer session.
Connect the supplied power adapter and USB lead. The heated filter takes several minutes to settle. Wait for its ready indication after switching on or changing the tuning. Start with a long-focal-length eyepiece, use coarse focus first, then use the 12:1 fine control on a filament or a sharp part of the limb.
Solar observing safety
Read the manufacturer’s instructions before use. Check the complete telescope and filter assembly before pointing it at the Sun. If anything is damaged, loose or missing, stop. Keep all factory solar-filter components installed. For alignment, watch the projected spot on the handle finder’s screen. Never look along the tube towards the Sun or through a finder aperture. Supervise children and visitors throughout.


Will the whole Sun fit on your camera?
At 1,690 mm the Sun forms an image about 15.7 mm across at native focus. The apparent diameter varies through the year. Leave extra space for prominences, tracking drift and the edges of a stacked image.
At native focus, a sensor 15.7 mm high is a close fit for the average disc. It leaves very little room for prominences and may clip the Sun when it appears larger. A taller sensor, a compatible reducer or a mosaic gives more framing freedom. DayStar lists optional 0.6× and 0.33× reducers.

A monochrome astronomy camera makes efficient use of this single red wavelength. The included Flat Cap is a diffuser for recording calibration flats to correct uneven illumination and dust shadows. Remove it for normal viewing and imaging. A camera and the appropriate attachment for its nosepiece or thread are separate purchases.
Technical specifications
| Clear aperture | 100 mm |
|---|---|
| Effective focal length | 1,690 mm |
| Effective focal ratio | Approximately f/16.9 |
| Observing wavelength | Hydrogen-alpha, 656.28 nm |
| Filter editions | Chromosphere ≤0.5 Å FWHM · Prominence >0.5 Å FWHM |
| Wavelength tuning | Electronic thermal control, ±0.5 Å in 0.1 Å steps |
| Blocking filter | 18 mm, integrated |
| Visual field | Passes the full solar disc · maximum field 0.75° |
| Focuser | Rack and pinion, 12:1 fine focus, with focus lock |
| Eyepiece fitting | Supplied 1.25″ adapter · optional 2″ holder |
| Mounting | Vixen-style dovetail and ¼″–20 tripod thread |
| Power | 5 V DC via USB Micro-B · telescope rated at 1.5 A · mains supply included |
| Weight with mounting rings | Approximately 3.6 kg |
| Telescope length | 489–613 mm |
| Manufacturer | DayStar Filters, USA |
What comes with the telescope?
In the case
- Sol 100 telescope with the selected H-alpha filter
- Mounting rings, dovetail and carry handle with integrated solar finder
- 1.25″ eyepiece adapter, protective covers and imaging Flat Cap
- AC power supply, USB power cable and hard carry case
Complete your setup
- For visual observing, add a suitable mount, diagonal and eyepiece.
- For imaging, add a camera and a suitable nosepiece or threaded adapter.
- Optional DayStar accessories include a 2″ eyepiece holder, imaging tilt adapter and compatible focal reducers.
How the other Sol apertures compare

Sol 60
930 mm · f/15.5
The smallest solar image and lightest tube in the range.

Sol 80
1,400 mm · f/17.5
More image scale than the 60, at about 2.8 kg with rings.

Sol 130
1,890 mm · f/14.5
The largest aperture and longest native focal length of the four.
Practical questions
Does the Sol 100 take a separate Quark in the focuser?
DayStar builds the telecentric lens and blocking filter into the drawtube and secures the narrowband assembly to the telescope. The Sol 100 is supplied as a complete solar optical system. Its focus travel covers both close-coupled imaging and use with a diagonal.
What magnification does a 32 mm eyepiece give?
About 53×. Divide the effective focal length of 1,690 mm by the eyepiece focal length. A simple long-focal-length Plössl is a practical starting point for finding and centring the disc. The eyepiece’s field stop also affects how much sky you see.
Can I use a focus motor?
The focuser has a 6 mm coarse shaft and an approximately 4 mm fine shaft. DayStar designed it to accept third-party motors. Check the coupling, mounting bracket and available clearance for your chosen unit.