A closer look at the changing solar limb
The 130 mm DayStar Sol is the largest aperture in the range. Its 1,890 mm effective focal length places fine limb and active-region detail across more of a camera sensor, while the telescope still passes the whole disc visually with a suitable eyepiece. It is a choice for an observer with a steady mount and a site that regularly delivers good daytime seeing.

Choosing your filter edition
Chromosphere
Choose this for contrast across the face of the Sun. The narrow passband brings out dark filaments and bright plage around active regions. Prominences are also visible at the limb.
SOL130C · 0.5 Å FWHM or narrowerProminence
Choose this when your main interest is the changing shape of prominences against the dark sky. The wider passband favours limb features, with softer contrast across the disc.
SOL130P · wider than 0.5 Å FWHMEach edition has its own factory-selected filter. The tuning knob shifts the wavelength slightly either side of H-alpha to explore detail in moving material. Choose the edition when ordering.
What you can observe in H-alpha

Reading the H-alpha view
The extra aperture is most rewarding during steady intervals. A prominence can change shape while you watch, but rapidly shimmering edges usually tell you more about the air above your observing site. A stable mount helps you tell the two effects apart.
Hydrogen-alpha isolates red light at 656.28 nm, revealing the chromosphere above the visible solar surface. These reference photographs show how observers record its features. Image processing and solar activity both affect their appearance.


Mounting, finding the Sun and focusing

Secure the Vixen-style dovetail in a suitable mount. The foot also has a ¼″–20 tripod thread. Allow for the weight of the complete setup. A tracking mount makes it easier to keep the same feature in view during a longer session.
Connect the supplied power adapter and USB lead. The heated filter takes several minutes to settle. Wait for its ready indication after switching on or changing the tuning. Start with a long-focal-length eyepiece, use coarse focus first, then use the 12:1 fine control on a filament or a sharp part of the limb.
Solar observing safety
Read the manufacturer’s instructions before use. Check the complete telescope and filter assembly before pointing it at the Sun. If anything is damaged, loose or missing, stop. Keep all factory solar-filter components installed. For alignment, watch the projected spot on the handle finder’s screen. Never look along the tube towards the Sun or through a finder aperture. Supervise children and visitors throughout.
Will the whole Sun fit on your camera?
At 1,890 mm the Sun forms an image about 17.6 mm across at native focus. The apparent diameter varies through the year. Leave extra space for prominences, tracking drift and the edges of a stacked image.
A 23.5 × 15.7 mm sensor clips the native solar disc on its short side. A 36 × 24 mm sensor leaves room for centring and limb activity. For a smaller camera, the alternatives are a suitable DayStar reducer, a mosaic or deliberate close-up framing.

A monochrome astronomy camera makes efficient use of this single red wavelength. The included Flat Cap is a diffuser for recording calibration flats to correct uneven illumination and dust shadows. Remove it for normal viewing and imaging. A camera and the appropriate attachment for its nosepiece or thread are separate purchases.
Technical specifications
| Clear aperture | 130 mm |
|---|---|
| Effective focal length | 1,890 mm |
| Effective focal ratio | Approximately f/14.5 |
| Observing wavelength | Hydrogen-alpha, 656.28 nm |
| Filter editions | Chromosphere ≤0.5 Å FWHM · Prominence >0.5 Å FWHM |
| Wavelength tuning | Electronic thermal control, ±0.5 Å in 0.1 Å steps |
| Blocking filter | 18 mm, integrated |
| Visual field | Passes the full solar disc |
| Focuser | Rack and pinion, 12:1 fine focus, with focus lock |
| Eyepiece fitting | Supplied 1.25″ adapter · optional 2″ holder |
| Mounting | Vixen-style dovetail and ¼″–20 tripod thread |
| Power | 5 V DC via USB Micro-B · telescope rated at 1.5 A · mains supply included |
| Weight with mounting rings | Approximately 5.1 kg |
| Telescope length | 665–775 mm |
| Manufacturer | DayStar Filters, USA |
What comes with the telescope?
In the case
- Sol 130 telescope with the selected H-alpha filter
- Mounting rings, dovetail and carry handle with integrated solar finder
- 1.25″ eyepiece adapter, protective covers and imaging Flat Cap
- AC power supply, USB power cable and hard carry case
Complete your setup
- For visual observing, add a suitable mount, diagonal and eyepiece.
- For imaging, add a camera and a suitable nosepiece or threaded adapter.
- Optional DayStar accessories include a 2″ eyepiece holder, imaging tilt adapter and compatible focal reducers.
How the other Sol apertures compare

Sol 60
930 mm · f/15.5
The smallest solar image and lightest tube in the range.

Sol 80
1,400 mm · f/17.5
More image scale than the 60, at about 2.8 kg with rings.

Sol 100
1,690 mm · f/16.9
100 mm aperture, an 18 mm blocking filter and a 0.75° visual field.
Practical questions
What mount should I allow for?
The telescope and rings account for about 5.1 kg. Add the complete imaging or visual train and allow for the leverage of a tube up to 775 mm long. Choose a mount with a compatible Vixen-style saddle and enough capacity for the complete assembly.
What magnification does a 32 mm eyepiece give?
About 59×. Divide the effective focal length of 1,890 mm by the eyepiece focal length. A simple long-focal-length Plössl is a practical starting point for finding and centring the disc. The eyepiece’s field stop also affects how much sky you see.
Can I use a focus motor?
The focuser has a 6 mm coarse shaft and an approximately 4 mm fine shaft. DayStar designed it to accept third-party motors. Check the coupling, mounting bracket and available clearance for your chosen unit.