Skip to content
Skip to product information
Description

Compact support. Simple adjustment.

The Dark Clear Skies DCS166 compact scope mount combines one adjustable support ring with a short red dovetail base. It provides a simple way to hold a suitably sized guiding or finder accessory on a compatible support, without the length of a two-ring mounting rail.

Single-ring support with manual adjustment

Three silver thumb screws around the ring let you position and secure the accessory within it. The short base keeps the mounting arrangement compact, making it useful where space on a small imaging setup is limited.

Match the ring to the actual outside diameter of the accessory body. A telescope's quoted aperture is the size of its optics and does not establish whether its tube will fit this mount.

Single black COKEN TA133 support ring with silver adjustment screws on a short red dovetail base
DCS166: one adjustable black ring on a short red dovetail base.

Check the fit before ordering

The supplier illustration for this mount shows an accessory-body diameter range of 16–29 mm. Measure the body at the point where the ring will sit, and check that the adjustment screws can hold it securely.

The red foot has a dovetail profile. Confirm that its width and shape match your receiving shoe or clamp; it should not be assumed to fit every finder shoe, Vixen saddle or Arca-style clamp.

Fitting and adjustment

  1. With the accessory supported, back the three ring screws out sufficiently to insert its body.
  2. Position it within the ring and bring the screws into contact evenly. Tighten only enough to secure it.
  3. Seat the red base fully in a matching shoe or clamp and secure the receiving clamp.
  4. Check that the accessory remains stable, then arrange any cables so they do not pull on the mount.

A single-ring support depends on the shape, length and weight of the attached accessory. Longer or heavier guidescopes may need a different mounting arrangement.

Product details

DCS SKU DCS166
Supplier reference TA133
Mounting arrangement One adjustable ring on a short dovetail base
Body diameter shown by COKEN 16–29 mm
Adjustment Three thumb screws
Colour shown Black ring, red base and silver screws

What's included

One single-ring scope mount with its short red base and adjustment screws, as pictured. Guidescope, finder, guide camera and receiving shoe or clamp are not included.

Will this fit a 30 mm guidescope?

Check its tube-body diameter, rather than its aperture. The 16–29 mm range shown for this mount must accommodate the part of the body that passes through the ring.

For help matching a mount to your equipment, contact Dark Clear Skies with the model and measured body diameter.

DCS166 Compact Scope Mount – Single Ring & Short Red Dovetail Base

Regular price £19.99
Or £6.66 × 3 interest-free with PayPal

In stock · 4 available

DCS166

Compact support. Simple adjustment.

The Dark Clear Skies DCS166 compact scope mount combines one adjustable support ring with a short red dovetail base. It provides a simple way to hold a suitably sized guiding or finder accessory on a compatible support, without the length of a two-ring mounting rail.

Single-ring support with manual adjustment

Three silver thumb screws around the ring let you position and secure the accessory within it. The short base keeps the mounting arrangement compact, making it useful where space on a small imaging setup is limited.

Match the ring to the actual outside diameter of the accessory body. A telescope's quoted aperture is the size of its optics and does not establish whether its tube will fit this mount.

Single black COKEN TA133 support ring with silver adjustment screws on a short red dovetail base
DCS166: one adjustable black ring on a short red dovetail base.

Check the fit before ordering

The supplier illustration for this mount shows an accessory-body diameter range of 16–29 mm. Measure the body at the point where the ring will sit, and check that the adjustment screws can hold it securely.

The red foot has a dovetail profile. Confirm that its width and shape match your receiving shoe or clamp; it should not be assumed to fit every finder shoe, Vixen saddle or Arca-style clamp.

Fitting and adjustment

  1. With the accessory supported, back the three ring screws out sufficiently to insert its body.
  2. Position it within the ring and bring the screws into contact evenly. Tighten only enough to secure it.
  3. Seat the red base fully in a matching shoe or clamp and secure the receiving clamp.
  4. Check that the accessory remains stable, then arrange any cables so they do not pull on the mount.

A single-ring support depends on the shape, length and weight of the attached accessory. Longer or heavier guidescopes may need a different mounting arrangement.

Product details

DCS SKU DCS166
Supplier reference TA133
Mounting arrangement One adjustable ring on a short dovetail base
Body diameter shown by COKEN 16–29 mm
Adjustment Three thumb screws
Colour shown Black ring, red base and silver screws

What's included

One single-ring scope mount with its short red base and adjustment screws, as pictured. Guidescope, finder, guide camera and receiving shoe or clamp are not included.

Will this fit a 30 mm guidescope?

Check its tube-body diameter, rather than its aperture. The 16–29 mm range shown for this mount must accommodate the part of the body that passes through the ring.

For help matching a mount to your equipment, contact Dark Clear Skies with the model and measured body diameter.

Single black COKEN TA133 support ring with silver adjustment screws on a short red dovetail base
DCS166 Compact Scope Mount – Single Ring & Short Red Dovetail Base

Pairs well with

Drawer Title
Similar Products