Skip to content
Skip to product information
Description

Dark Clear Skies · Imaging Accessories

T2 to T2 Male Adapter

DCS040 · Join two female T2 connections

Connect two components with female T2 threads using a direct male-to-male coupling.

DCS040 has an M42 × 0.75 male thread at each end, for joining compatible T2-threaded astronomy equipment. The central grip ring gives you a handhold when assembling or separating the connection.

T2 → T2M42 × 0.75 at both ends
Male / MaleTwo external threads
DCS040Dark Clear Skies product code
Dark Clear Skies DCS040 T2 to T2 adapter, angled view with opposing rim notches
Angled view of DCS040, showing its stepped profile, central grip ring and opposing end-rim notches.
  • Join two female T2 ports. Each end screws into a matching M42 × 0.75 female connection.
  • Keep your imaging train threaded. Use a direct coupling between compatible camera adapters, filter accessories, spacers or other T2 components.
  • Grip the centre during assembly. The ribbed outer ring helps you hold the adapter while starting the threads by hand.

Check your T2 connections

Both pieces of equipment need an internal M42 × 0.75 thread. Check the diameter, pitch and gender on each component before ordering.

Adapter connection Matching equipment connection
End A: M42 × 0.75 male M42 × 0.75 female (internal)
End B: M42 × 0.75 male M42 × 0.75 female (internal)

Check the pitch: T2 uses M42 × 0.75. An M42 × 1 connection has a different thread pitch and will not mate correctly. Check the full specification in your equipment’s manual.

Fitting and spacing

Start each connection squarely and tighten by hand using the central grip ring. The threads should engage smoothly. If they resist, remove the adapter and check the pitch, thread alignment and clearance before trying again.

Check that the projecting threads have room inside both components and that the mating faces seat as intended. A thread that bottoms out early can leave a gap between the shoulders.

When using a reducer or field flattener, check the assembled distance from its specified reference surface to the camera sensor. Allow for all adapters, the camera’s sensor recess, any filter wheel or off-axis guider, and the way the mating threads overlap.

DCS040 T2 to T2 adapter side profile showing both male threads and the central grip ring
Side profile showing the male threads on both sides of the central grip ring.

Technical specifications

Specification Details
Brand Dark Clear Skies
Product code / SKU DCS040
Adapter type T2 to T2 male-to-male coupling
Connection A M42 × 0.75 male
Connection B M42 × 0.75 male
Mating connections M42 × 0.75 female at both ends
Colour / finish Black
Grip Ribbed central ring

What’s included

1 × Dark Clear Skies DCS040 T2 to T2 male adapter.

Frequently asked questions

Does this connect two female T2 fittings?

Yes. Both ends of DCS040 are male M42 × 0.75, so each mates with a matching female T2 connection. Check thread engagement and shoulder clearance with both components.

Will it fit an M42 × 1 thread?

No. T2 uses the finer M42 × 0.75 pitch. Confirm the pitch as well as the 42 mm nominal diameter before fitting.

Can I use it in a camera imaging train?

Yes, where both components have matching M42 × 0.75 female threads and sufficient clearance for the male collars. Check the assembled back-focus distance required by any reducer or field flattener.

Need help checking the connection?

Send us the model names or thread specifications of the two components you want to join. We can help you check the required thread size, pitch, gender and fitting clearance.

Ask Dark Clear Skies

Dark Clear Skies · Practical astronomy accessories, with UK support

DCS040 T2 to T2 Male Adapter | Dark Clear Skies

Regular price £14.99
Or £4.99 × 3 interest-free with PayPal

DCS040

Dark Clear Skies · Imaging Accessories

T2 to T2 Male Adapter

DCS040 · Join two female T2 connections

Connect two components with female T2 threads using a direct male-to-male coupling.

DCS040 has an M42 × 0.75 male thread at each end, for joining compatible T2-threaded astronomy equipment. The central grip ring gives you a handhold when assembling or separating the connection.

T2 → T2M42 × 0.75 at both ends
Male / MaleTwo external threads
DCS040Dark Clear Skies product code
Dark Clear Skies DCS040 T2 to T2 adapter, angled view with opposing rim notches
Angled view of DCS040, showing its stepped profile, central grip ring and opposing end-rim notches.
  • Join two female T2 ports. Each end screws into a matching M42 × 0.75 female connection.
  • Keep your imaging train threaded. Use a direct coupling between compatible camera adapters, filter accessories, spacers or other T2 components.
  • Grip the centre during assembly. The ribbed outer ring helps you hold the adapter while starting the threads by hand.

Check your T2 connections

Both pieces of equipment need an internal M42 × 0.75 thread. Check the diameter, pitch and gender on each component before ordering.

Adapter connection Matching equipment connection
End A: M42 × 0.75 male M42 × 0.75 female (internal)
End B: M42 × 0.75 male M42 × 0.75 female (internal)

Check the pitch: T2 uses M42 × 0.75. An M42 × 1 connection has a different thread pitch and will not mate correctly. Check the full specification in your equipment’s manual.

Fitting and spacing

Start each connection squarely and tighten by hand using the central grip ring. The threads should engage smoothly. If they resist, remove the adapter and check the pitch, thread alignment and clearance before trying again.

Check that the projecting threads have room inside both components and that the mating faces seat as intended. A thread that bottoms out early can leave a gap between the shoulders.

When using a reducer or field flattener, check the assembled distance from its specified reference surface to the camera sensor. Allow for all adapters, the camera’s sensor recess, any filter wheel or off-axis guider, and the way the mating threads overlap.

DCS040 T2 to T2 adapter side profile showing both male threads and the central grip ring
Side profile showing the male threads on both sides of the central grip ring.

Technical specifications

Specification Details
Brand Dark Clear Skies
Product code / SKU DCS040
Adapter type T2 to T2 male-to-male coupling
Connection A M42 × 0.75 male
Connection B M42 × 0.75 male
Mating connections M42 × 0.75 female at both ends
Colour / finish Black
Grip Ribbed central ring

What’s included

1 × Dark Clear Skies DCS040 T2 to T2 male adapter.

Frequently asked questions

Does this connect two female T2 fittings?

Yes. Both ends of DCS040 are male M42 × 0.75, so each mates with a matching female T2 connection. Check thread engagement and shoulder clearance with both components.

Will it fit an M42 × 1 thread?

No. T2 uses the finer M42 × 0.75 pitch. Confirm the pitch as well as the 42 mm nominal diameter before fitting.

Can I use it in a camera imaging train?

Yes, where both components have matching M42 × 0.75 female threads and sufficient clearance for the male collars. Check the assembled back-focus distance required by any reducer or field flattener.

Need help checking the connection?

Send us the model names or thread specifications of the two components you want to join. We can help you check the required thread size, pitch, gender and fitting clearance.

Ask Dark Clear Skies

Dark Clear Skies · Practical astronomy accessories, with UK support

Dark Clear Skies DCS040 T2 to T2 adapter, angled view with opposing rim notches
DCS040 T2 to T2 Male Adapter | Dark Clear Skies

Pairs well with

Drawer Title
Similar Products