Skip to content
Skip to product information
Description

Dark Clear Skies · Mounting & guiding

The right length for your guidescope setup

A slotted dovetail plate gives your guidescope mounting hardware room to fit your setup. Choose from six lengths, from a compact 60mm plate to a 240mm option for a longer mounting arrangement.

Select the length to suit your ring spacing, mounting position and available clearance. Each plate is supplied individually.

60–240mmSix plate lengths
Slotted topAdjustable fixing positions
Red finishAs shown in the photographs
Guidescope useMatch to your mounting hardware

Six lengths, one practical choice

The right plate is the one that accommodates your guidescope hardware without unnecessary overhang. Start with the spacing of the fixing points you need to support, then check the mounting slots and the clearance around your telescope.

Plate length DCS SKU When to consider it
60mm DCS-DP-60 A compact mounting arrangement with closely spaced fixing points.
90mm DCS-DP-90 A little more room for positioning while keeping the plate short.
120mm DCS-DP-120 A middle-length option when a shorter plate limits your fixing positions.
150mm DCS-DP-150 More space for mounting hardware or for adjusting its position along the plate.
210mm DCS-DP-210 A longer arrangement where ring spacing and clearance require additional length.
240mm DCS-DP-240 The longest option in this range; check the complete mounting arrangement for overhang.

These are selection pointers. Plate length alone does not establish compatibility with a particular guidescope, ring set or clamp.

See the plates

Each size is pictured separately. Images are not a scale comparison.

Check the complete connection

Plate to clamp

Match the dovetail profile to the clamp or shoe you intend to use. Guidescope and finder mounting fittings vary, so check the shape and clamping engagement before choosing a plate.

Hardware to plate

Check the spacing of your mounting points and use fixings suitable for both the plate and your equipment. The slots provide positioning adjustment, but the bolts still need the correct diameter, thread and length.

Fit comes before length. Choosing a longer plate does not establish compatibility with a Vixen GP or Losmandy saddle. Check the actual connection required by your setup.

Fitting and setup

  1. Measure your mounting-point spacing and check for clearance around focusers, cameras and cables.
  2. Choose a plate length that supports the hardware within the available fixing positions.
  3. Attach the hardware with suitable fixings. Check that bolts engage properly without protruding into equipment.
  4. Fit the plate to the matching clamp or shoe, then check that both connections are secure and free of movement.

For guiding, pay particular attention to rigidity. A plate is only one part of the assembly: loose ring fixings or a poorly seated clamp can allow movement between the guide camera and the main telescope.

Product details

Product Guidescope dovetail mounting plate
Available lengths 60mm, 90mm, 120mm, 150mm, 210mm and 240mm
Fixing layout Slotted top with a central circular hole, as shown
Material Aluminium
Central through-hole 6.8 mm, unthreaded
Finish shown Red
Supply One plate in the selected length

What you are choosing

One guidescope dovetail plate in your selected length. Guidescope, guide camera, support rings, clamp and telescope are separate items. Choose mounting fixings to suit the equipment you are attaching.

Common questions

Which length should I buy?

Measure the fixing-point spacing of your hardware and the space around it. Choose a length that accommodates the mounting positions with suitable clearance; a longer plate is not automatically a better fit.

Does this include guidescope rings?

No. This listing is for the selected plate. Guidescope support rings and the guidescope itself are separate items.

Will it fit any dovetail saddle?

Check the actual clamp or shoe profile and its engagement with the plate. Dovetail fittings are not interchangeable simply because they share the same name.

Are the longer plates shown to scale?

No. Each size is pictured separately and images are not a scale comparison. Use the selected plate length rather than estimating dimensions from the photograph.

DCS Guidescope Dovetail Plates – 60–240 mm

Regular price £6.99
Or £2.33 × 3 interest-free with PayPal

In stock · 6 available

DCS-DP-60

  • 60mm
  • 90mm
  • 120mm
  • 150mm
  • 210mm
  • 240mm

Dark Clear Skies · Mounting & guiding

The right length for your guidescope setup

A slotted dovetail plate gives your guidescope mounting hardware room to fit your setup. Choose from six lengths, from a compact 60mm plate to a 240mm option for a longer mounting arrangement.

Select the length to suit your ring spacing, mounting position and available clearance. Each plate is supplied individually.

60–240mmSix plate lengths
Slotted topAdjustable fixing positions
Red finishAs shown in the photographs
Guidescope useMatch to your mounting hardware

Six lengths, one practical choice

The right plate is the one that accommodates your guidescope hardware without unnecessary overhang. Start with the spacing of the fixing points you need to support, then check the mounting slots and the clearance around your telescope.

Plate length DCS SKU When to consider it
60mm DCS-DP-60 A compact mounting arrangement with closely spaced fixing points.
90mm DCS-DP-90 A little more room for positioning while keeping the plate short.
120mm DCS-DP-120 A middle-length option when a shorter plate limits your fixing positions.
150mm DCS-DP-150 More space for mounting hardware or for adjusting its position along the plate.
210mm DCS-DP-210 A longer arrangement where ring spacing and clearance require additional length.
240mm DCS-DP-240 The longest option in this range; check the complete mounting arrangement for overhang.

These are selection pointers. Plate length alone does not establish compatibility with a particular guidescope, ring set or clamp.

See the plates

Each size is pictured separately. Images are not a scale comparison.

Check the complete connection

Plate to clamp

Match the dovetail profile to the clamp or shoe you intend to use. Guidescope and finder mounting fittings vary, so check the shape and clamping engagement before choosing a plate.

Hardware to plate

Check the spacing of your mounting points and use fixings suitable for both the plate and your equipment. The slots provide positioning adjustment, but the bolts still need the correct diameter, thread and length.

Fit comes before length. Choosing a longer plate does not establish compatibility with a Vixen GP or Losmandy saddle. Check the actual connection required by your setup.

Fitting and setup

  1. Measure your mounting-point spacing and check for clearance around focusers, cameras and cables.
  2. Choose a plate length that supports the hardware within the available fixing positions.
  3. Attach the hardware with suitable fixings. Check that bolts engage properly without protruding into equipment.
  4. Fit the plate to the matching clamp or shoe, then check that both connections are secure and free of movement.

For guiding, pay particular attention to rigidity. A plate is only one part of the assembly: loose ring fixings or a poorly seated clamp can allow movement between the guide camera and the main telescope.

Product details

Product Guidescope dovetail mounting plate
Available lengths 60mm, 90mm, 120mm, 150mm, 210mm and 240mm
Fixing layout Slotted top with a central circular hole, as shown
Material Aluminium
Central through-hole 6.8 mm, unthreaded
Finish shown Red
Supply One plate in the selected length

What you are choosing

One guidescope dovetail plate in your selected length. Guidescope, guide camera, support rings, clamp and telescope are separate items. Choose mounting fixings to suit the equipment you are attaching.

Common questions

Which length should I buy?

Measure the fixing-point spacing of your hardware and the space around it. Choose a length that accommodates the mounting positions with suitable clearance; a longer plate is not automatically a better fit.

Does this include guidescope rings?

No. This listing is for the selected plate. Guidescope support rings and the guidescope itself are separate items.

Will it fit any dovetail saddle?

Check the actual clamp or shoe profile and its engagement with the plate. Dovetail fittings are not interchangeable simply because they share the same name.

Are the longer plates shown to scale?

No. Each size is pictured separately and images are not a scale comparison. Use the selected plate length rather than estimating dimensions from the photograph.

DCS 60 mm red guidescope dovetail plate with two mounting slots and central round hole
DCS Guidescope Dovetail Plates – 60–240 mm

Pairs well with

Drawer Title
Similar Products