Skip to content
Skip to product information
Description

Fit a larger area of the Sun on a small sensor

The DayStar 0.33× combines a focal reducer and tilting camera connection for the Combo Quark H-alpha filter. Choose the 0.33× when the short side of your sensor is the limiting dimension. It can bring the whole disc into reach on a suitable combination, particularly with small solar cameras.

Reduction
0.33× nominal
Camera fitting
T-thread
Spacing
17.5 or 12.5 mm
DayStar 0.33X REDUCER-TILT showing the model marking and opposed thumbscrews.
Look for the 0.33× engraving when identifying the higher-reduction model.

Work out the field before choosing a reducer

A 2,000 mm effective focal length becomes approximately 660 mm. For a Sun 0.53° across, the disc would then span about 6.1 mm on the sensor. Compare this with the sensor’s shorter active dimension and leave a little space for the limb. These figures describe image size at the nominal reduction.

The shorter effective focal length also puts more light into each pixel for an extended target, which can help when selecting short exposures in unsteady daytime seeing. Use the built-in tilt adjustment if interference bands remain visible.

Fitting and detail

Manufacturer’s rear view of a DayStar tilt reducer with protective cap fitted.
The capped rear housing shown in DayStar’s reducer photographs. The reduction factor is marked on the opposite side.
Two orange solar discs from DayStar, showing interference bands on the left and reduced banding on the right.
DayStar’s example of an interference pattern before and after camera tilt. It illustrates the purpose of tilt and does not compare the two reduction factors.

Estimate the solar image size

Chart of solar image diameter with no reduction, 0.60× reduction and 0.33× reduction at the same input focal length.
Calculated using a 0.53° solar diameter. Compare the predicted image size with the shorter side of your sensor and allow a margin for pointing and the solar limb.

Technical specifications

Model IEQT33
Designed for DayStar Combo Quark H-alpha filter
Nominal reduction 0.33×
Camera connection T2 camera fitting
Camera with 17.5 mm flange-to-sensor distance Attach directly
Camera with 12.5 mm flange-to-sensor distance Fit the included 5 mm ring on the camera side
Example at 2,000 mm input focal length 660 mm nominal output focal length

What comes with it

Included

DayStar 0.33× tilt reducer and 5 mm spacing ring.

Supplied separately

Combo Quark, telescope and T-thread imaging camera. Check the camera’s flange-to-sensor distance before choosing its spacing.

Solar observing. This accessory forms part of a solar observing or imaging system. Fit and inspect the complete solar filter and any required energy rejection in accordance with the telescope and filter manuals before pointing at the Sun.

Questions about fit and use

Which focal length goes into the calculation?

Use the effective focal length immediately ahead of the reducer, including any telecentric amplification in the optical train.

Does this guarantee full-disc imaging?

The result depends on focal length, sensor dimensions and the usable field of the optical system. The chart gives the nominal diameter of the disc before allowing for vignetting or a framing margin.

Related equipment and guidance

DayStar Combo Quark 0.33× Tilt Reducer for Solar Imaging

Regular price £349.00
Or £116.33 × 3 interest-free with PayPal

IEQT33

Fit a larger area of the Sun on a small sensor

The DayStar 0.33× combines a focal reducer and tilting camera connection for the Combo Quark H-alpha filter. Choose the 0.33× when the short side of your sensor is the limiting dimension. It can bring the whole disc into reach on a suitable combination, particularly with small solar cameras.

Reduction
0.33× nominal
Camera fitting
T-thread
Spacing
17.5 or 12.5 mm
DayStar 0.33X REDUCER-TILT showing the model marking and opposed thumbscrews.
Look for the 0.33× engraving when identifying the higher-reduction model.

Work out the field before choosing a reducer

A 2,000 mm effective focal length becomes approximately 660 mm. For a Sun 0.53° across, the disc would then span about 6.1 mm on the sensor. Compare this with the sensor’s shorter active dimension and leave a little space for the limb. These figures describe image size at the nominal reduction.

The shorter effective focal length also puts more light into each pixel for an extended target, which can help when selecting short exposures in unsteady daytime seeing. Use the built-in tilt adjustment if interference bands remain visible.

Fitting and detail

Manufacturer’s rear view of a DayStar tilt reducer with protective cap fitted.
The capped rear housing shown in DayStar’s reducer photographs. The reduction factor is marked on the opposite side.
Two orange solar discs from DayStar, showing interference bands on the left and reduced banding on the right.
DayStar’s example of an interference pattern before and after camera tilt. It illustrates the purpose of tilt and does not compare the two reduction factors.

Estimate the solar image size

Chart of solar image diameter with no reduction, 0.60× reduction and 0.33× reduction at the same input focal length.
Calculated using a 0.53° solar diameter. Compare the predicted image size with the shorter side of your sensor and allow a margin for pointing and the solar limb.

Technical specifications

Model IEQT33
Designed for DayStar Combo Quark H-alpha filter
Nominal reduction 0.33×
Camera connection T2 camera fitting
Camera with 17.5 mm flange-to-sensor distance Attach directly
Camera with 12.5 mm flange-to-sensor distance Fit the included 5 mm ring on the camera side
Example at 2,000 mm input focal length 660 mm nominal output focal length

What comes with it

Included

DayStar 0.33× tilt reducer and 5 mm spacing ring.

Supplied separately

Combo Quark, telescope and T-thread imaging camera. Check the camera’s flange-to-sensor distance before choosing its spacing.

Solar observing. This accessory forms part of a solar observing or imaging system. Fit and inspect the complete solar filter and any required energy rejection in accordance with the telescope and filter manuals before pointing at the Sun.

Questions about fit and use

Which focal length goes into the calculation?

Use the effective focal length immediately ahead of the reducer, including any telecentric amplification in the optical train.

Does this guarantee full-disc imaging?

The result depends on focal length, sensor dimensions and the usable field of the optical system. The chart gives the nominal diameter of the disc before allowing for vignetting or a framing margin.

Related equipment and guidance

DayStar 0.33X REDUCER-TILT showing the model marking and opposed thumbscrews.
DayStar Combo Quark 0.33× Tilt Reducer for Solar Imaging

Pairs well with

Drawer Title
Similar Products