Skip to content
Skip to product information
Description

Quark USB-A to Micro-B Power Cable

Run power from a suitable USB-A supply to the Micro-B input on a DayStar Quark. The 10 ft lead gives approximately 3 m of reach around a telescope and mount.

10 ftApprox. 3 m
USB-ASupply end
Micro-BQuark end
USB-A and Micro-B plugs on the DayStar Quark power lead
USB-A and Micro-B plugs on the DayStar Quark power lead.

In use

The heavier-gauge conductors are specified for up to 2.1 A. Leave a relaxed cable loop so movement of the telescope does not pull at the filter connector.

Check the fit

Check that the power source meets the requirements of the Quark model and has a USB-A output. USB-C devices need the appropriate separate connection.

Specifications and fitting

Approx. 3 m 10 ft
Supply end USB-A
Quark end Micro-B
Manufacturer part number USB2CBL

What you receive

One USB-A to Micro-B cable. Mains supply and filter are separate.

Is this the Remote Ready tuning kit?

It is the power lead. Select the dedicated Remote Ready kit for supported computer tuning.

Related equipment and guidance

Quark 5 V supplyRemote Ready control cableGeneral accessoriesAll DayStar equipment

DayStar Quark USB-A to Micro-B Power Cable | 3 m

Regular price £18.00
Or £6.00 × 3 interest-free with PayPal

USB2CBL

Quark USB-A to Micro-B Power Cable

Run power from a suitable USB-A supply to the Micro-B input on a DayStar Quark. The 10 ft lead gives approximately 3 m of reach around a telescope and mount.

10 ftApprox. 3 m
USB-ASupply end
Micro-BQuark end
USB-A and Micro-B plugs on the DayStar Quark power lead
USB-A and Micro-B plugs on the DayStar Quark power lead.

In use

The heavier-gauge conductors are specified for up to 2.1 A. Leave a relaxed cable loop so movement of the telescope does not pull at the filter connector.

Check the fit

Check that the power source meets the requirements of the Quark model and has a USB-A output. USB-C devices need the appropriate separate connection.

Specifications and fitting

Approx. 3 m 10 ft
Supply end USB-A
Quark end Micro-B
Manufacturer part number USB2CBL

What you receive

One USB-A to Micro-B cable. Mains supply and filter are separate.

Is this the Remote Ready tuning kit?

It is the power lead. Select the dedicated Remote Ready kit for supported computer tuning.

Related equipment and guidance

Quark 5 V supplyRemote Ready control cableGeneral accessoriesAll DayStar equipment
USB-A and Micro-B plugs on the DayStar Quark power lead
DayStar Quark USB-A to Micro-B Power Cable | 3 m

Pairs well with

Drawer Title
Similar Products