Skip to content
Skip to product information
Description

Remote Ready USB Power & Data Cable for Quark, Gemini & Sol

Monitor a compatible DayStar filter from a Windows computer and, on supported firmware, change its tuning remotely. The separate power supply feeds the filter while the USB connection carries data.

WindowsComputer control
Micro-BFilter connection
100–240 V ACSupply input
DayStar Remote Ready USB power and data lead shown with a compatible filter
DayStar Remote Ready USB power and data lead shown with a compatible filter.

In use

Remote tuning is useful when the filter and camera are mounted beyond easy reach. The software can report filter status and put it to sleep. When remote tuning is active the hardware knob setting is ignored.

Check the fit

Remote wavelength adjustment requires factory-installed firmware 6.20 or newer on Quark and Sol, or 9.20 or newer on Gemini. Earlier units support monitoring and sleep only. Confirm your exact unit before purchase.

Specifications and fitting

Computer control Windows
Filter connection Micro-B
Supply input 100–240 V AC
Manufacturer part number DSZRRC

What you receive

Remote Ready lead with attached USB data cable and international power supply. Filter, telescope and computer are separate.

Is this the same as the ordinary Quark USB power cable?

This kit adds the supported computer-control connection. The ordinary Quark power cable is intended to supply power.

Related equipment and guidance

Quark USB power leadQuark 5 V supplyGeneral accessoriesAll DayStar equipmentDayStar product manual (PDF)

DayStar Remote Ready USB Power & Data Cable for Quark, Gemini & Sol

Regular price £99.00
Or £33.00 × 3 interest-free with PayPal

DSZRRC

Remote Ready USB Power & Data Cable for Quark, Gemini & Sol

Monitor a compatible DayStar filter from a Windows computer and, on supported firmware, change its tuning remotely. The separate power supply feeds the filter while the USB connection carries data.

WindowsComputer control
Micro-BFilter connection
100–240 V ACSupply input
DayStar Remote Ready USB power and data lead shown with a compatible filter
DayStar Remote Ready USB power and data lead shown with a compatible filter.

In use

Remote tuning is useful when the filter and camera are mounted beyond easy reach. The software can report filter status and put it to sleep. When remote tuning is active the hardware knob setting is ignored.

Check the fit

Remote wavelength adjustment requires factory-installed firmware 6.20 or newer on Quark and Sol, or 9.20 or newer on Gemini. Earlier units support monitoring and sleep only. Confirm your exact unit before purchase.

Specifications and fitting

Computer control Windows
Filter connection Micro-B
Supply input 100–240 V AC
Manufacturer part number DSZRRC

What you receive

Remote Ready lead with attached USB data cable and international power supply. Filter, telescope and computer are separate.

Is this the same as the ordinary Quark USB power cable?

This kit adds the supported computer-control connection. The ordinary Quark power cable is intended to supply power.

Related equipment and guidance

Quark USB power leadQuark 5 V supplyGeneral accessoriesAll DayStar equipmentDayStar product manual (PDF)
DayStar Remote Ready USB power and data lead shown with a compatible filter
DayStar Remote Ready USB Power & Data Cable for Quark, Gemini & Sol

Pairs well with

Drawer Title
Similar Products